Product catalog

   Compared with the portable strapping machine model LSV2, the automatic strapping machine LSQ3 has a larger battery capacity and three operating functions - AUTO, SEMI-AUTO, MANUAL. The machine combines tensioning, soldering and cutting of strapping strip, no need for buckles or staples, while increasing efficiency and reducing strapping waste. In addition, when fully charged without the need to connect wires, the portable electric strapping machine can work anywhere, anytime. The machine uses an LCD screen to adjust the functions of the machine. You can set one of three control functions at your discretion, and also adjust the strength and welding time of the packaging tape required during the packaging process. Moreover, it will allow you to intuitively know the specific values ​​you need during the packaging process through the data displayed on the electronic screen, and you can quickly install the same product next time.

   The machine is equipped with one rechargeable lithium battery, the capacity of which is 5000 mAh (4000 mAh), and a fully charged battery is enough to strapping 700 points of packaging strip (depending on the type of packaging tape, this value may vary slightly). The battery can be recharged 2000 times, charging time is within 90 minutes, then it can work outdoors for 5 hours. It can be used for PET (polyester), PP (polypropylene) strips with a width of 12 to 16 mm and a thickness of 0.5 to 1,2 mm. It is an ideal tool for strapping light to medium-sized packages such as corrugated boxes, plastic pipes, etc.

Characteristics

- Tension force: 2800 N (adjustable)

- Speed: 100-200 mm/s

- Soldering strength: approximately 75% from PET strip streight

- Soldering quantity: 700-750 points

- Ambient temperature: 5 to 45 degrees Celsius

- Optimal operating temperature: 15 to 20 degrees Celsius

- Sizes: 335х150х145

- Weight: 4 kg

- Battery: 5.0 mAh (4.0 mAh) weight: 0.6kg

Charger

- Input: 230V 50/60 Hz 75w

- Output: 10.8 – 18V DC-3.5 A