Product catalog

   The waste removal machine is used in the printing industry paperboard, mounting flute paper color box waste edge removal work, can’t be used for other purposes. This machine drives the high-speed circulation of the tooth chain through the pneumatic motor, and the use of sharp teeth to check out the waste paper edge for removal. Suitable for paper 200g-500g cardboard, single/double flute paper, double pit mounting paper

     Features

- The efficiency of waste removal machine is at least 5-10 times higher than that of traditional manual waste removal.

- The waste removal machine is compact in structure, lightweight in weight, very convenient to use, and can be operated by male and female employees after simple training.

- The power source of the waste cleaning machine adopts pneumatic motor, which has good safety and long equipment life.

- The tooth chain of the waste removal machine is made of high-strength alloy steel after thermal process treatment, which has extremely high hardness and strong wear resistance.

• Each chain tooth is cut by wire cutting and washing process, and then riveted into strips by hand.
• Chain material: 61 ° imported pure white steel, durable and wear-resistant.

    Operation Steps

1.  One hand grasps the arched handle of the upper part of the machine to ensure that the machine does not swing loosely, and the other hand gently holds the pneumatic motor.

2.  Fingers press the motor elastic switch, the motor begins to rotate, the chain begins to move, the greater the pressure, the faster the speed, the requirements of pressing to the end, until the speed stabilizes, you can prepare to start the waste work.

3.  Put the front bevel of the rotating chain horizontally above the waste edge, hold it tightly to keep the machine from swinging back and forth, left and right, and at the same time force downwards, you can see the waste edge separated from the paper stack.

4.  After the end of the waste, the finger releases the elastic switch and the motor stops rotating.

5.  When stopping the use of the waste cleaning machine, you must first cut off the air source, and then press the switch to release the residual air to prevent injury. Hang the machine under the designated bracket to avoid improper bumping and damaging the chain.

Characteristics

- Air inet – 1/4”

- Chain speed: 2500 rpm

- Weight: 3.5 kg

- Air pressure: 6-8 kg/cm2

- Air consumption: 13 cfm

Machine made in P.R.C.